Carbon Steel Seamless Pipes Shipped to Argentina

Location: Buenos Aires, Argentina

Octal Steel completed a carbon steel piping package shipment to Buenos Aires, Argentina, covering seamless pipes, pipe fittings, flanges, branch connection fittings, bolts, nuts and washers. This order was prepared for a complete piping connection package, where matching standards, size compatibility and shipment document consistency are important for site installation and project release.

The supplied products were mainly manufactured and inspected according to ASTM A234 GRB, ASTM A105, ASTM A106 GRB, API 5L GRB, ASTM A516 Gr.70, ASTM A193 GR B7 Zinc and ASTM A194 GR 2H Zinc. The available size range was suitable for 1 1/2 inch to 32 inch piping systems.The shipment also covered representative size items such as 4 inch 90 degree long radius elbow, 8 inch ASTM A105 weld neck flange, 24 inch spectacle blind flange and 32 inch large diameter carbon steel flange, showing the order’s coverage from medium-size pipe fittings to large-diameter flange components.

Order Overview

Supplied Product Scope

This shipment included a wide range of carbon steel pipe connection products for project installation. The product scope covered seamless pipe, 90° long radius elbows, 45° long radius elbows, caps, tees, reducing tees, eccentric reducers, concentric reducers, weld neck flanges, blind flanges, SW flanges, SO flanges, figure 8 flanges, weldolets, sockolets, threadolets, pipe nipples, drip rings, stud bolts, nuts and washers. Typical line items included 4 inch 90 degree long radius elbow, 8 inch ASTM A105 weld neck flange, 24 inch spectacle blind flange and 32 inch large diameter carbon steel flange, which helped support different connection, isolation and large-size piping assembly requirements in the same project package.

For a mixed piping package like this, the key point is not only supplying each item separately. The more important control point is whether the pipe, fittings, flanges and fasteners can match the project’s size range, pressure class, material requirement and installation sequence. Octal Steel checked the product list against the purchase order before shipment to reduce the risk of missing items or mismatched components at the job site.

Standards and Material Control

The carbon steel seamless pipes were supplied under ASTM A106 GRB and API 5L GRB, while the fittings and flanges followed standards such as ASTM A234 GRB, ASTM A105 and ASTM A516 Gr.70 according to product type. Zinc-coated fasteners were supplied under ASTM A193 GR B7 Zinc and ASTM A194 GR 2H Zinc, supporting bolted flange assembly requirements.

Before shipment, the order was prepared with attention to material identification, product marking and document matching. For project buyers, this helps connect each delivered item with the corresponding standard, size and material record during receiving inspection.For example, the 8 inch ASTM A105 weld neck flange was controlled under forged carbon steel flange requirements, while the 4 inch 90 degree long radius elbow followed the fitting standard and dimensional matching requirement. Larger flange items, including the 24 inch spectacle blind flange and 32 inch large diameter carbon steel flange, required closer checking of face protection, bolt-hole matching, marking and packing consistency before shipment.

Packaging and Shipment to Buenos Aires

The goods were packed and arranged for export to Buenos Aires, Argentina. Since the order included multiple product types and sizes, Octal Steel organized the shipment by product category and purchase order requirement to make unloading, counting and site distribution easier for the client.

For carbon steel fittings and flanges, proper packing is important because flange faces, bevel ends, threaded ends and branch connection areas need protection during long-distance transport. The packaging and shipment documents were prepared to support customs clearance and final receiving inspection at the destination port.During packing, special attention was given to flange faces, bevel ends and large-diameter components, especially items such as the 24 inch spectacle blind flange and 32 inch large diameter carbon steel flange, to reduce surface damage and identification errors during unloading and receiving inspection.

Octal Steel Supply Support

Octal Steel supplies carbon steel pipes, pipe fittings, flanges and related piping accessories for international oil, gas, industrial and construction projects. For orders involving many line items, we support clients with product matching, standard review, packing coordination and export documentation.

This Argentina shipment shows Octal Steel’s ability to handle complete carbon steel piping packages rather than single-item supply only. From seamless pipe and elbows to flanges, branch fittings and bolting components, the order was managed to help the client receive a more coordinated and installation-ready shipment.